Penosil Spray Foam Insulation Can Easy Spray 111 Bundle

PENOSIL Bundle - 12 cans, gun & cleaner
EasySpray Foam 111 Sprayable gun foam
Yield up to 3m² with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed

PENOSIL EasySpray Foam 111 is an one-component, ready-to-use sprayable gun foam for sealing and insulating all types of inconvenient places and surfaces, where using traditional insulation materials is difficult. Fast and convenient to use. Special spray applicator is compatible with most foam guns.

APPLICATION AREAS
Sealing and insulating all types of inconvenient places, uneven and round surfaces, where using traditional insulation materials is difficult.
Thermal- and sound-insulating lintels, doors, ceilings, pipes, attics, balconies, garages, cellars, containers, vehicles, vessels and other construction parts with the risk of thermal bridges.
Insulating hard-to-reach surfaces and repairing existing insulation layer.
Reducing the impact of thermal bridges.
Preventing condensation on cold surfaces.
ADHERES TO
Wood
Concrete
Stone
Plaster
Metal
PVC
Polystyrene
PACKAGE

Aerosol can 1000 ml, content 700 ml
12 pcs per box

USAGE INSTRUCTIONS

Surfaces must be clean from dust, loose particles and oil stains.

Moisten dry surfaces with water mist to ensure a faster curing time and better end results.

Attach the spray applicator onto the tip of the foam gun. Shake the can vigorously at least 20 times. Hold the foam can in an upright position with the valve up. Screw the can onto the gun. Hold the can upside down when extruding the foam. Foam output can be adjusted with gun trigger and adjustment screw. Rotate the spray applicator as needed.

Apply the foam from approx. 40 cm distance. One foam layer’s thickness is max. 2 cm. Wait at least 60 min before applying the next layer. Number of layers is not limited. When applying foam in layers, moisten slightly between each layer. Excess foam can be cut off after it has fully cured.

Do not aim the gun at people. Avoid screwing the can onto the gun with valve upside down. Do not screw the gun to the can. Do not bend or turn the can during screwing.

TIPS
Air temperature during use: +10°C to +30°C.
Protect adjacent surfaces with paper, plastic film or other suitable material.
Due to the wide variety of construction materials, we recommend a preliminary compatibility test.
Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C).

LIMITATIONS
Does not adhere to polyethylene (PE) or PTFE (Teflon®) or silicone surfaces.
Do not use at temperatures below +10°C.
Although the cured foam is less sensitive to UV and direct sunlight than other PU foams, it is still recommended to cover it with a suitable opaque material.
Do not cover before foam has fully cured.
Spray applicator is compatible with most foam guns. Always check compatibility before choosing the foam gun.